Designed for the Swedish Wrap coin ring technique, this kit from Jason's Works enables you to make smaller rings from larger coins. It is ideal for creating the mid-knuckle rings (that continue to grow in popularity) and for making rings as small as size 4-3/4 (U.S.) from dollar and half-dollar coins.
This kit includes three hardened stainless steel reduction dies and nine hardened bronze plungers, each marked with witness lines to help indicate its movement as you press it downward. Also included is the "Ring Bearer" tool which adds additional height to the reduction dies, and three push-follower plungers. The tools are fitted into a wood organizer base. Two 20-ft. (approx.) rolls of 1/2"-wide Teflon® wrapping tape is also included.
Start the coin ring making process as usual, by punching, folding and reducing the coin with your Jason's Works tools and ring stretcher (available separately). Then, wrap your ring with several layers of Teflon® tape and set it into a Swedish Wrap reduction die. The push-follower plungers adjust diameters as they and the coin are pressed down into the die. Use your Ross push-followers and your press to push the coin into the die, stacking multiple plungers as the ring diameter becomes smaller until you achieve the desired amount of reduction.
• #1 tall plunger (115846)
• #2 tall plunger (115847)
• #3 tall plunger (115848)
• #4 tall plunger (115849)
• #5 tall plunger (115850)
• #6 tall plunger (115851)
• #7 plunger (115946)
• #8 plunger (115947)
• #9 plunger (115948)
• 0.6" x 0.9" reduction die (115931)
• 0.8" x 1.1" reduction die (115932)
• 1.0" x 1.4" reduction die (115933)
• Ross push follower, small (115963)
• Ross push follower, medium (115964)
• Ross push follower, large (115965)
• "Ring Bearer" for Swedish wrap reduction Dies (115966)
• Jason's Works Swedish wrap wood organizer (115845)