This Friedrich Dick square hand file is ideal for scoring lines when creating bends and for forming, smoothing or refining 90° angles. The double-cut file is uniform in width and thickness, tapers to a fine point, and has teeth on all four sides, allowing it to access crevices, small openings, and corners.
This file has a German cut #2; German-cut files are graded by the number of teeth, counting teeth parallel to the long axis of the file. German cuts start coarser than Swiss and go finer, offering more increments for more precise cutting. In all cut styles, the higher the number, the finer its cut.
A double-cut file features two sets of evenly spaced teeth set in two directions, one at a slightly different angle than the other. Double-cut files are designed to cut more aggressively, maximizing the work of each stroke to remove more metal with fewer strokes. At the end of the stroke, the file should be lifted from the workpiece and repositioned for the next stroke; dragging the file backward against the metal can mar the metal and damage the teeth.
Hand files, also called 'full-size' files, feature a larger cutting surface that is longer and wider than other file types and are ideal for fast, efficient removal of material from the workpiece for initial shaping, for smoothing and, in finer cuts, for finishing. These files have a narrow, tapered tang intended to be secured into a handle (available separately) that provides comfort and control of the file when in use.
Among the finest jewelers' files in the world, Friedrich Dick files are made of tough chrome/tool steel alloy and precisely machined to yield sharp corners and fine points. These files have deep-cut teeth that provide efficient, uniform stock removal; they are 66–67 HRC hardness for exceptional service with minimal care.