Quantity (EA) Price
1 and above $288.75

The price for higher quantity price breaks will appear in your shopping cart.

Save More!

Order Summary
Quantity (Each) 0.00
Total Price $0.00


Converting AC current to DC current is necessary for all plating/e-coating processes. This rectifier is intended primarily for e-coating application and features a digital display, allowing you to control voltage precisely during the coating process. Lead wires with clips (not included) are available separately.
• Offers two levels of control, coarse and fine, for the current output and for the voltage outputs.
• Outputs are adjustable from 0–60 volts and from 0–3 amps
• LED reading accuracy: +/– 1% for voltage and +/– 2% for current
• Toggle easily to accommodate input voltages of either 110-volt AC or 220-volt AC.
• Current is automatically held stable if you are set up in current control, and the system is automatically shut down to prevent damage in case a short should occur.
• Line regulation: CV less than or equal to 0.01% + 1 mV; CC less than or equall to 0.2% + 1 mA.
• Load Regulation: CV less than or equal to 0.01% + 3mV; CC less than or equal to 0.2% + 3 mA.
• Ripple noise: CV less than or equal to 0.5 mV RMS; CC less than or equal to 3 mA RMS.
• Optimal operating environment: 0–40C, relative humidity is less than 90%.
• One-year manufacturer's warranty.
• Comes with a 110-volt plug; to use a 220-volt power outlet, you will need a plug adapter (not included; see Please Note below).

  • Dimensions : 5-1/4"W x 11-1/2"D x 6-1/4"H
  • Voltage : 110/220 volts (dual)
  • Country of origin : China

Please Note: IMPORTANT: This item is wired for dual 110- and 220-volt capability and is sold with a U.S. plug. Because amperage, outlets and plugs vary widely by location, you may need a different plug. If so, you are responsible for having the appropriate plug or adapter installed by a qualified professional. Rio Grande assumes no liability for improper or inadequate re-wiring or adapters procured by customer.

Catalog page: 2020-2021 Tools and Equipment Catalog p. 736