
The U-MARQ® GEM-FX5 brings professional flat engraving to just about any business with simple, uncluttered controls and straightforward design. Its generous 10-1/2" x 8" work area handles just about any task you can imagine, and its speed (up to 133mm/sec.) ensures cost-effective production. Connect to your personal computer or laptop, then start providing your customers with personalizing services—growing your business in the process!
• Features newly designed controller electronics, a faster processor (CPU), more energy-efficient drives, upgraded internal software and drivers. Built-in linear rails deliver stable operation and a longer service life.
• Interface to PC/laptop: serial and USB 2.
• Mechanics: Cartridge spindle, lead screws and precision linear rails, steel chassis.
• Engravable materials: Most materials are suitable for its diamond drag.
• Flat work size: 10-3/8" x 8" (266.7 x 203.2mm)
• Z-axis travel: 2-1/2" (65mm)
• Z-axis clearance: 2" (50mm) top of jaws, 1-3/16" (30mm) top of beam
• Maximum vice opening: 7" (180mm)
• Spindle motor speed: 14,000rpm
• Power of spindle motor: 42 watts; brushless hall-effect DC motor
• Supplied accessories: USB cable, power cable, DC-00100 120° diamond drag cutter, CC-00100 0.3mm carbide cutter, cutter knob, vernier nose cone, light touch, U-MARQ GEM-FX engraving software package and quick start guide.
• IMPORTANT: This item is wired for dual 110- and 220-volt capability and is sold with a U.S. plug. Because amperage, outlets and plugs vary widely by location, you may need a different plug. If so, you are responsible for having the appropriate plug or adapter installed by a qualified professional. Rio Grande assumes no liability for improper or inadequate re-wiring or adapters procured by customer.
• This machine must be used in conjunction with your computer. Minimum PC/Laptop requirements: 2 GHz dual core PC running Windows 7, 8 or 10, 1Gb RAM, 100 Mb free hard disk space and 2 free USB ports. This machine is compatible ONLY with PC (not Mac) computers.
• As the owner of a U-MARQ® engraving machine, you can register at www.u-marq.com and download free tutorial videos on your machine. Simply click on the 'Forums' tab at the top of the U-MARQ home page and register to begin. Or, copy and paste this link directly into your browser's address bar: "http://tinyrio.com/umarq"; then register to begin.
• U-MARQ® GEM-FX5 engraving machine
• Quick start guide
• U-MARQ GEM-FX5 engraving software package
• GEM-FX5 super sticky mat
• Photo engraving software
• 120° diamond cutter
• 0.3mm carbide cutter
• Gold cutting kit including one precious metal cutter, 25mm x 5M engravers double sided holding tape, 13mm x 5M engravers double sided holding tape, engraving lubricant, and sacrifice material
• Center vice with standard jigs
• Set of three jigs including watch & medal, ring & pen, and jewelry
• Cutter knob
• Light touch knob
• Plastic nose cone
• Power box and cable
• USB cable