This item has been discontinued, but you can still get it as an Outlet item; please see below;


Outlet Item Available



Description

The U-MARQ® GEM-FX5 brings professional flat engraving to just about any business with simple, uncluttered controls and straightforward design. Its generous 10-1/2" x 8" work area handles just about any task you can imagine, and its speed (up to 133mm/sec.) ensures cost-effective production. Connect to your personal computer or laptop, then start providing your customers with personalizing services—growing your business in the process!
• Features newly designed controller electronics, a faster processor (CPU), more energy-efficient drives, upgraded internal software and drivers. Built-in linear rails deliver stable operation and a longer service life.
• Interface to PC/laptop: serial and USB 2.
• Mechanics: Cartridge spindle, lead screws and precision linear rails, steel chassis.
• Engravable materials: Most materials are suitable for its diamond drag.
• Flat work size: 10-3/8" x 8" (266.7 x 203.2mm)
• Z-axis travel: 2-1/2" (65mm)
• Z-axis clearance: 2" (50mm) top of jaws, 1-3/16" (30mm) top of beam
• Maximum vice opening: 7" (180mm)
• Spindle motor speed: 14,000rpm
• Power of spindle motor: 42 watts; brushless hall-effect DC motor
• Supplied accessories: USB cable, power cable, DC-00100 120° diamond drag cutter, CC-00100 0.3mm carbide cutter, cutter knob, vernier nose cone, light touch, U-MARQ GEM-FX engraving software package and quick start guide.


Specifications:
  • Brand : U-MARQ
  • Model or style no. : GEM-FX5
  • Dimensions : 18"W x 13-1/4"D x 11-3/8"H
  • Voltage : 110/220 volts (dual)
  • Country of origin : United Kingdom

Please Note:

IMPORTANT: This item is wired for dual 110- and 220-volt capability and is sold with a U.S. plug. Because amperage, outlets and plugs vary widely by location, you may need a different plug. If so, you are responsible for having the appropriate plug or adapter installed by a qualified professional. Rio Grande assumes no liability for improper or inadequate re-wiring or adapters procured by customer.
• This machine must be used in conjunction with your computer. Minimum PC/Laptop requirements: 2 GHz dual core PC running Windows 7, 8 or 10, 1Gb RAM, 100 Mb free hard disk space and 2 free USB ports. This machine is compatible ONLY with PC (not Mac) computers.
• As the owner of a U-MARQ® engraving machine, you can register at www.u-marq.com and download free tutorial videos on your machine. Simply click on the 'Forums' tab at the top of the U-MARQ home page and register to begin. Or, copy and paste this link directly into your browser's address bar: "http://tinyrio.com/umarq"; then register to begin.


Catalog page: 2020-2021 Tools and Equipment Catalog p.326
Kit set includes:
  • • U-MARQ® GEM-FX5 engraving machine
    • Quick start guide
    • U-MARQ GEM-FX5 engraving software package
    • GEM-FX5 super sticky mat
    • Photo engraving software
    • 120° diamond cutter
    • 0.3mm carbide cutter
    • Gold cutting kit including one precious metal cutter, 25mm x 5M engravers double sided holding tape, 13mm x 5M engravers double sided holding tape, engraving lubricant, and sacrifice material
    • Center vice with standard jigs
    • Set of three jigs including watch & medal, ring & pen, and jewelry
    • Cutter knob
    • Light touch knob
    • Plastic nose cone
    • Power box and cable
    • USB cable