The PulsePoint™ Studio™ Plus 125 offers a longer duty cycle and more available power. In the PulsePoint Studio Plus laser welding machines, Neutec® provides a more powerful tabletop machine with all the technological and engineering benefits of their larger models. Its built-in Leica® 10X stereo-microscope ensures clear view of your work and your task progress.
• An on-board, high-resolution camera built into this model allows you to display what's happening in the chamber—ideal for training and demonstration purposes. Connect a computer monitor to its RCA jack to capture live-action video or still shots for review or marketing purposes.
• A built-in USB port allows you to upload settings from any machine to save them for later use, to forward settings to Neutec for analysis, or to download them to any other machine in your shop floor, sharing the ideal settings needed for any task precisely and immediately.
• This small machine delivers a higher-duty cycle that meets the demanding work needs of a busy retailer or designer with professional results for far less than larger machines cost—a truly significant benefit for any budget.
• The Studio Plus models need only 21-1/2"W x 24"D x 18"H of workspace and weigh less than 100 pounds; they're easy to move and set up, easy to use and easy to maintain.
• Larger opening in the weld chamber provides access for larger pieces and allows you to work more freely inside.
• Pulse-shape settings allow you to configure your pulse to take advantage of specific metallurgic characteristics.
• Memory cells allow you to save up to 32 individual, specific configurations for your most-used applications.
• Small footprint fits easily into any shop.
• Affordable—take advantage of laser welding at a cost that is truly budget friendly.
• Superior, high-efficiency components run cooler, reducing stress on critical-wear parts, for notably longer service life and greatly reduced maintenance.
• The Studio Plus models ensure close, repeatable control over laser parameters to deliver precise results.
• Up to 125 joules of output energy is more than enough for nearly every laser-welding application—particularly on silver.
• High-efficiency optics enable a higher average power output from fewer joules.
• User-friendly touch-screen control.
• Advanced constant-voltage inverter power supply eliminates power spikes to deliver more effective welding and drastically extend the flashlamp life.
• Includes a complete start-up kit, containing these supplies and accessories:
- Two user keys
- One user manual
- Polyethylene tubing for compressed air, inert gas; 8 meters
- One control pedal
- Two Allen wrenches, 2.5mm and 3mm
- Three plastic gas spreader cones
- One wrist rest
- Deionized water for tank; 5 liters
- One plastic syringe (for filling/draining coolant water)
- One piece non-reflecting protective glass
- Two fuses
- Steel wire for welding; 30cm
- Steel practice blanks
Laser crystal: Nd-YAG
Maximum pulse power and duration: 25mS at 125 joules
Peak pulse power: 5.0kW
Pulse duration: 0.5-20mS
Average power: 60W
Pulse frequency: 0.5-15Hz
• IMPORTANT: This item is wired for dual 110- and 220-volt capability and is sold with a U.S. plug. Because amperage, outlets and plugs vary widely by location, you may need a different plug. If so, you are responsible for having the appropriate plug or adapter installed by a qualified professional. Rio Grande assumes no liability for improper or inadequate re-wiring or adapters procured by customer.
• The plug included with this machine is a NEMA 5-20P suitable for the power requirements of the laser welder. The PulsePoint Studio 100 draws at least 16 amps of power and MUST be plugged into an outlet wired to a 20-amp circuit to avoid overloading. A 20-amp outlet is a three-prong grounded outlet and is recognizable by the 'T'-shape of one of the two parallel openings.