Quantity (EA) Price
1 and above $17,250.00

The price for higher quantity price breaks will appear in your shopping cart.

Contact Request

Because the Neutec® PulsePoint™ Studio™ Plus 100 Laser Welder is capital equipment or requires more specific shipping information, Rio prefers to personally answer any questions you may have and help you complete your purchase.
Please give us a call, email us, or simply fill out the request for information below to have one of our experts contact you at your convenience.
We look forward to serving you!

Call: toll-free at 1-844-247-7775 (local at 505-839-3067)
Email to: [email protected]

Request More Information

Save More!

Order Summary
Quantity (Each) 0.00
Total Price $0.00

Out of Stock


In the PulsePoint™ Studio™ Plus laser welding machines, Neutec® provides a more powerful tabletop machine with all the technological and engineering benefits of their larger models. Its built-in Leica® 10X stereo-microscope ensures clear view of your work and your task progress.
• This small machine delivers a higher-duty cycle that meets the demanding work needs of a busy retailer or designer with professional results for far less than larger machines cost—a truly significant benefit for any budget.
• The Studio Plus models need only 21-1/2"W x 24"D x 18"H of workspace and weigh less than 100 pounds; they're easy to move and set up, easy to use and easy to maintain.
• Larger opening in the weld chamber provides access for larger pieces and allows you to work more freely inside.
• Pulse-shape settings allow you to configure your pulse to take advantage of specific metallurgic characteristics.
• Memory files allow you to save up to 32 individual, specific configurations for your most-used applications.
• Small footprint fits easily into any shop.
• Affordable—take advantage of laser welding at a cost that is truly budget friendly.
• Superior, high-efficiency components run cooler, reducing stress on critical-wear parts, for notably longer service life and greatly reduced maintenance.
• The Studio Plus models ensure close, repeatable control over laser parameters to deliver precise results.
• Up to 100 joules of output energy is more than enough for nearly every laser-welding application—particularly on silver.
• High-efficiency optics enable a higher average power output from fewer joules.
• User-friendly touch-screen control.
• Advanced constant-voltage inverter power supply eliminates power spikes to deliver more effective welding and drastically extend the flashlamp life.
• Includes a complete start-up kit, containing these supplies and accessories:
  - Two user keys
  - One user manual
  - Polyethylene tubing for compressed air, inert gas; 8 meters
  - One control pedal
  - Two Allen wrenches, 2.5mm and 3mm
  - Three plastic gas spreader cones
  - One wrist rest
  - Deionized water for tank; 5 liters
  - One plastic syringe (for filling/draining coolant water
  - One piece non-reflecting protective glass
  - Two fuses
  - Steel wire for welding; 30cm
  - Steel practice blanks

  • Brand : Neutec
  • Model or style no. : PulsePoint 100
  • Power : 110/220 volts (dual); 50/60Hz; 20 amps
  • Dimensions : 21-1/2"W x 24"D x 18"H
  • Country of origin : Italy
Additional Specifications:
  • Laser crystal: Nd-YAG
    Wavelength: 1064nm
    Maximum pulse power and duration: 20mS at 100 joules
    Peak pulse power: 4.8kW
    Pulse duration: 0.5-20mS
    Average power: 55W
    Pulse frequency: 0.5-15Hz
    Spot diameter: 0.3-1.5mm
    Parameter memory files: 32 (max. available files)
    Pulse duration: 0.5-20.0mS

Please Note:

IMPORTANT: This item is wired for dual 110- and 220-volt capability and is sold with a U.S. [or European-style] plug. Because amperage, outlets and plugs vary widely by location, you may need a different plug. If so, you are responsible for having the appropriate plug or adapter installed by a qualified professional. Rio Grande assumes no liability for improper or inadequate re-wiring or adapters procured by customer.
• The plug included with this machine is a NEMA 5-20P suitable for the power requirements of the laser welder. The PulsePoint Studio 100 draws at least 16 amps of power and MUST be plugged into an outlet wired to a 20-amp circuit to avoid overloading. A 20-amp outlet is a three-prong grounded outlet and is recognizable by the 'T'-shape of one of the two parallel openings.

Catalog page: 2016-2017 Tools and Equipment Catalog p.498