Cleanly cut round holes into leather watch bands, belts and more with this easy-to-use punch tool and acrylic block. The 5"-long tool comes with two punching pin (tip) sizes, allowing you to create 1.5mm or 2mm holes. The 2-3/8" x 1-1/4" x 3/16" acrylic block provides the ideal work surface—protecting your countertop and keeping the pins undamaged and sharp. To use, orient the punch vertically, hold the tip securely against the leather band, then strike the punch downward with your palm making a clean hole.
• This punch is designed to use with leather; do not use it to cut metal as this will damage the punching tips.
• Punch tool
• 1.5mm tip
• 2.0mm tip
• Square acrylic block, 2-3/8" x 1-1/4" x 3/16"