Quantity (EA) Price
1 and above $63.00

The price for higher quantity price breaks will appear in your shopping cart.

Save More!

Order Summary
Quantity (Each) 0.00
Total Price $0.00

Out of Stock


Description

Invented by Gary Hutchinson and manufactured by Swanstrom Tools, this unique clamp made from machined aluminum enables you to securely hold and manipulate stampings made with disc cutters, or any other flat sheet you wish to hold. By placing two stampings in the clamp you can simultaneously saw out identical parts. The clamp has four movable fingers for securely holding the stamping, and a target plate for positioning.

Its ergonomic design reduces stress on hands and fingers when manipulating small parts for various operations such as sawing. Its round shape and four movable clamping fingers make it easy to rotate virtually any shape while performing work. The steel clamping screws incorporate a Delrin washer to prevent marring of the piece when it is clamped into place.

The Delrin target plate serves to provide initial centering of the disc within the clamp. The plate does not have a crosshair or concentric rings because the design and function of the human eye can discern center position in relation to edges when objects are not too large. Having several crosshairs or concentric circles tends to confuse the eyes unless they highly contrast each other. If you desire, you can use a felt tipped marker to make your own erasable lines on the Delrin plate.


Specifications:
  • Brand : Swanstrom
  • Dimensions : OD: 2-1/2” ID: 1-3/4” Thickness: 5/16”
  • Model or style no. : Gary's Clamp
  • Country of origin : United States
Additional Specifications:
  • Maximum disc size: 36mm diameter
    Max gauge: 5mm thick, based on height of opening on screws


Please Note: • If you are sawing out multiple discs of the same size, it is best to leave one clamp finger in position when removing your finished disc so that you don't have to reposition discs on the target plate every time.
• You may not need to use all clamp fingers to hold the disc in place. Finger clamps not being used can be secured out of the way against the wall of the clamp.
• This clamp can be used to hold other items for saw piercing such as coins, and two discs at a time for earrings.
• The screws will overlap the edges of the disc/coin by approximately 2mm.

Kit set includes:
  • One Delrin target plate

  • One stubby screw driver
  • Four extra clamping screws with Delrin washers
  • Instruction sheet