The Beadalon® bangle bracelet weaver helps you to create woven bangle bracelets in a variety of configurations. Set the pins in the holes drilled into the base; there are three rows available to use depending on the diameter of the bangle you want. Use the innermost row for the smallest size and the outermost row for the largest size. Secure each pin in place with two plastic fasteners, one at the surface of the base and the other underneath the base. Then, following the included instructions, weave your wire (the tool accommodates diameters .15" to .036"), cord or thread around the pins to create the woven design. When the bracelet is at your desired width, the included directions show you how to remove it from the pins and finish. If desired, you can incorporate beads or other findings into your design. The bracelet weaver tool includes one metal base (3-1/2"H x 3-3/8" dia.), 22 pins (3-3/4"L), and 44 plastic fasteners.