14K White Gold Casting Grain, Palladium White
Alternate Text 14K White Gold Casting Grain, Palladium White

Quantity (DWT) Price
0.01 - 4.99 $96.65
5.00 - 9.99 $96.15
10.00 and above $95.90

The price for higher quantity price breaks will appear in your shopping cart.

Save More!

Order Summary
Quantity (Pennyweight) 0.00
Total Estimated Price $0.00

SAFETY DATA SHEETS: View the SDS(s) for the information you need to use this item.


Get professional, repeatable results with this14-karat palladium white gold grain, rated Grade 1 by MJSA and specially formulated for white gold pieces.

Special additives help prevent firescale and produce a whiteness comparable to rhodium. Contains deoxidants so you can mix 50% casting scrap with new grain and still get good results.

Sold by the pennyweight (dwt.), minimum purchase is 0.2 dwt.

Any casting method.

Casting and Cleaning
In general, your casting temperature should be 100˚F (37.7˚C) above the liquidus point (somewhat hotter if the castings are intricate). Use a small amount of high-quality flux when melting with an open flame. We recommend Matt’s Casting Flux™. For further cleaning, mechanical means are recommended.

If you plan to re-use gold castings, remove the copper oxides from the surface in a pickling solution or by mechanical means. We recommend a minimum 1:1 ratio of new grain to used gold. All re-used gold should be clean and free of debris.

All ingredients are kept in an oxygen-reduced atmosphere during the melting and pouring process to ensure optimum deoxidation.

  • Specific gravity (g/cm3) : 14.3
  • Country of origin : Canada
  • Karat : 14K
  • Form : Casting grain
  • Solidus (melt) temperature : 1,974°F (1,079°C)
  • Liquidus (flow) temperature : 2,001°F (1,094°C)
  • Density : 14.22
  • Metal type : Gold

Please Note: • Casting temperatures are approximate; adjust for your particular alloy and application.
• Due to the manufacturing process of casting grain, the grain will vary in shape and size.
• For more information regarding the use or composition of this material, please refer to the reference sheet provided below.
• Customers within the European Union: Please be aware this item does not contain nickel and is in compliance with EU regulation EN1811:2011+A1:2015.
• We strive to measure quantities ordered as closely as possible; however, due to manufacturing tolerances at the mill, please allow for a ±10% variance when ordering.

Catalog page: 2020-2021 Tools and Equipment Catalog p. 770