Get professional, repeatable results and a light gold color with this 10-karat gold casting grain.
Special additives reduce firescale and promote good flow and fill, resulting in a smooth cast surface. Formulated with deoxidants so you can mix 50% casting scrap with new casting grain and still get good results.
Sold by the pennyweight (dwt.), minimum purchase is 0.2 dwt.
Any casting method.
Casting and Cleaning
In general, your casting temperature should be 100˚F (37.7˚C) above the liquidus point (somewhat hotter if the castings are intricate). Use a small amount of high-quality flux when melting with an open flame. We recommend Matt’s Casting Flux™. For further cleaning, mechanical means are recommended.
If you plan to re-use gold castings, remove the copper oxides from the surface in a pickling solution or by mechanical means. We recommend a minimum 1:1 ratio of new grain to used gold. All re-used gold should be clean and free of debris.
All ingredients are kept in an oxygen-reduced atmosphere during the melting and pouring process to ensure optimum deoxidation.
• Casting temperatures are approximate; adjust for your particular alloy and application.
• Due to the manufacturing process of casting grain, the grain will vary in shape and size.
• For more information regarding the use or composition of this material, please refer to the reference sheet provided below.