How To Use Rio Saw Lube

Follow these directions to properly lubricate hard-slabbing and general lapidary work.

Last edited: 7/5/2019

A light, oil-based lubricant ideally suited for slabbing hard material such as agate or jade, Rio Saw Lube keeps your blade cool during cutting.

Handling and Storage

Use in a well-ventilated area. Do not mix with oxidizers. Store in a closed container in a cool, dry, well-ventilated area. Water contamination should be avoided. Avoid exposure to high temperatures. Product contains Napthenic petroleum distillates. Hazardous decompositions or by-products of carbon, nitrogen, or sulfur oxides should not be inhaled. Keep out of reach of children and uninformed adults.

 

Usage

Apply Rio Saw Lube directly onto the blade. The amount of lubricant depends on your individual saw. Refer to your owner’s manual for instructions on application of lubricant.

 

Safety Precautions
CAUTION:
Can cause eye and skin irritation. Inhalation of mist may cause pneumonia. Avoid breathing oil mist. Do not get in eyes or on skin or clothing. Wash after handling. Use with adequate ventilation. Wear splash goggles and rubber gloves.

FIRST AID:
EYE CONTACT: Flush eyes with large amounts of water for 15 minutes, holding eyelids open. Seek medical attention.
SKIN CONTACT: Wash area thoroughly with soap and water. Seek medical attention.
INHALATION: Remove victim to fresh air. Restore breathing if necessary. Seek medical attention.
INGESTION: Do NOT induce vomiting. Seek medical attention immediately.