Find Your Dedeco®
With dozens of polishing options available in a wide range of sizes, shapes, grits and styles, there's a Dedeco® finishing tool for every process. Find which best suits your desired finish with this chart.
|
|
Ultra-Coarse to Ultra-Fine |
|||||||||
|
Aluminum Oxide |
||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
Remove |
Smooth |
Finish |
Pumice |
Polish |
||||||
|
36 grit [brown] |
50 grit [green] |
80 grit [yellow] |
120 grit [white] |
220 grit [red] |
400 grit [dark blue] |
600 grit [pink] |
6 micron [peach] |
1 micron [light green] |
||
|
Radial Bristle Use for: Getting into high details and recessed areas. Can be used on flat surfaces if wheels are stacked. |
|
|
|
|
|
|
|
|
|
|
|
Dual Radial Bristle Disc Use for: Instead of stacking standard radial bristle discs. Dual Radial Bristle discs are wider and do not require stacking. |
|
|
|
|
|
|
|
|||
|
Radial, Knife-Edge Use for: Tighter or recessed areas. Bristles are thicker towards the center to minimize breakage. |
|
|
|
|
|
|
|
|||
|
Snap On Radial Use for: Quick changing of discs. No need to change wheels on screw mandrel, they simply snap into place. |
|
|
|
|
|
|
|
|||
|
Wheel Use for: Flat surfaces mostly, but can be used for shaping. Can be shaped as needed. |
|
|
|
|
|
|
|
|
||
|
Wheel, Knife-Edge Use for: Recessed areas and corners. Can be shaped as needed. |
|
|
|
|
|
|
|
|
||
|
Sanding Band Use for: Flat surfaces. Inside and outside of ring shanks. |
|
|
|
|
|
|
|
|
||
|
Point Use for: Hard to reach or recessed areas. Side can be used for flat surfaces. Can be shaped as needed. Available in a variety of shapes: bullet, teardrop and point. |
|
|
|
|
|
|
||||
|
Pin Use for: Hard to reach areas and corners. Can be shaped as needed. |
|
|
|
|
|
|
||||
|
|
Silicon Carbide |
|||||||||
|
|
Remove |
Smooth |
Finish |
Polish |
||||||
|
|
Coarse [white] |
Medium [black] |
Fine [light blue] |
Extra-Fine [pink] |
||||||
|
Cylinder Use for: Best on flat surfaces. Inside and outside of ring shanks. Available in different diameters. |
|
|
|
|
||||||
|
Point Use for: Hard to reach or recessed areas. Side can be used for flat surfaces. Can be shaped as needed. Available in a variety of shapes: bullet, teardrop and point. |
|
|
|
|
||||||
|
Wheel Use for: Flat surfaces mostly, but can be used for shaping. Can be shaped as needed. |
|
|
|
|
||||||
|
Wheel, Knife-Edge Use for: Recessed areas and corners. Can be shaped as needed. |
|
|
|
|
||||||
