Rio Grande
Sharing your passion for making jewelry.
Products. Service. Know-how.

1.00 - 4.99
You save
5.00 - 9.99
10.00 - 19.99
20.00 - 49.99
* For quantities less than 1 ozt./dwt, price will be shown in your cart.
* The price for higher quantity price breaks will appear in your shopping cart.

 *Priced per pennyweight

14K Yellow Gold Wire Solder, 22-Ga., Easy

Item Number: 600851

This cadmium-free yellow gold 22-ga. easy wire solder is sold by the pennyweight.
Ft./dwt.: 1.18<br/>Dwt/ft.: 0.85<br/>Gauge: 22
Catalog page: 2016 Tools and Equipment Catalog p.694
Metal type: Gold
Karat/purity: 14K
Form: Wire
Metal color: Yellow
Liquidus temperature: 1,340°F (727°C)
Density: Easy
Country of origin: United States

please note: • Solder with confidence; all solder sold by Rio Grande has been cadmium-free since the late sixties, when the health risks of this element became known.<br/>• When ordering solder, be aware that you may receive multiple pieces totalling the weight ordered.

How To
How To Solder More Successfully
These tips can help you solder more successfully and more reliably . . . every time. They are so simple, but it can be too easy to let the little things slip our minds as we work through our processes.

• Use the least amount of solder needed to make a good joint. Do not flood the joint with solder.
• Pieces to be soldered should fit tightly together with no air space in between.
• Make sure the joint and the solder are clean. Prior to soldering, flux all surfaces well to prevent oxidation, which can inhibit solder flow.

The Basics On How To Solder Effectively
Here's how to solder effectively using the basic skills for soldering. Follow these steps to ensure strong, long-lasting joint.

Solder won’t flow on a dirty or greasy surface. Use a de-greasing detergent cleaner and an abrasive pad, or an abrasive such as pumice powder to remove dirt or grease from the metal being soldered. Rinse thoroughly after cleaning. You can also steam-clean the workpieces.
Components, findings and joints must fit tightly together. Gaps in joints and poorly matched junctures between parts create a poor solder joint, which could result in pitting of the solder or in a weak joint that could break. Occasionally, solder simply will not fill a poor-fitting area.
Flux prepares the metal surface to receive the fluid solder. When applying flux, make sure it is in contact with the solder at all times and that it touches both metal parts being joined. Some self-pickling fluxes also help dissolve oxides. Keeping the joint oxide-free is important for creating the ideal soldering surface.
Use either a neutral flame (equal parts oxygen and gas) or a reducing flame (more gas than oxygen). The metal adjacent to the joint must reach the necessary temperature before solder will flow. First concentrate the heat on the surrounding surface, then on the joint to be soldered. Remember, solder flows to the hottest part of the surface and toward the flame.
After soldering, use a mild acid pickle to clean nonferrous metals. This removes oxides and other soldering residues prior to finishing. When storing solders, keep them free from dirt and grease. Sheet solders may be cleaned to remove dirt or residue.

How To Differentiate Wire Solders
Knowing how to tell your wire solder from the variety of other wire on your bench will prevent accidentally mistaking one for the other and save the cost of redoing work or replacing materials when those mistakes are made.

• Hammer one end of your wire solder, or color the end with a permanent marker for quick, easy identification.
• Keep wire solder in a separate container from other wire you're using.


Brown & Sharpe Gauge Thicknesses

Use this handy guide to quickly, easily and accurately convert gauge sizes into inches or millimeters—or vice versa.

Gauge Inches Millimeters
0 .325 8.26
2 .257 6.54
4 .204 5.19
6 .162 4.12
8 .128 3.26
10 .102 2.59
12 .081 2.05
13 .072 1.83
14 .064 1.63
15 .057 1.45
16 .051 1.29
18 .040 1.02
19 .036 .912
20 .032 .812
21 .028 .723
22 .025 .644
23 .023 .573
24 .020 .511
25 .018 .455
26 .016 .405
27 .014 .360
28 .013 .321
29 .011 .286
30 .010 .255
32 .0080 .2019
34 .0063 .1600